PCB design

Schematics and multi-layer layouts, from a single sensor interface to multi-layer controllers, ready for fabrication and assembly.

PCB designAt a glance

Boards
Two-layer and multi-layer, SMT assembly
Outputs
Schematic PDF, Gerbers, drill files, BOM, placement files, STEP
Checks
Electrical and design rule checks, schematic matched to layout before release
3D
Full board model for enclosure fit checks
Parts
Chosen for stock and price, with alternates

Circuits we design

Microcontrollers

32-bit microcontroller boards with Wi-Fi, Bluetooth LE and over-the-air updates.

Industrial interfaces

RS-485 for Modbus RTU, CAN bus, relay-contact inputs and I/O expanders.

Power

12 V and 24 V inputs with protection, buck regulators, solar and battery charging for lead-acid and lithium packs, and constant-current LED drivers.

Sensing

Capacitive humidity front ends, light and presence sensors, and real-time clocks with battery backup.

Wireless

Tuned NFC antennas, external-antenna Wi-Fi modules and LoRa.

Layouts that survive the field

We decide protection and grounding at the schematic stage: surge suppression on every cable that leaves the enclosure, fail-safe receivers on RS-485, short loops for switching currents, Kelvin connections for current sensing and unbroken ground planes.

Parts are picked from what the assembler keeps in stock where possible, which keeps the cost of a small batch down and the lead time short.

Reviews of existing boards

Already have a design? We'll review the schematic and layout before you order and list each issue with a suggested fix. Design reviews

What you receive

  • The native design files: schematic, PCB and libraries
  • Fabrication files ready to upload to the board house
  • A bill of materials with manufacturer and supplier part numbers
  • A schematic PDF and a 3D model of the assembled board

Have a project in mind?

Email a short description and any drawings, schematics or photos you have. One-off boards, small tools and fixes are as welcome as larger projects.